Table of Contents
Advertisement
7. Scanner Features
If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing additional originals
with the number keys. Scanning will start automatically if additional originals are placed within this
time. You can end scanning and begin transmission by pressing the [ ] key within this time. Once
the specified time has elapsed, transmission starts automatically.
If [Continuous Wait] is selected, the machine will wait for the additional originals until the [ ] key is
pressed. Scanning will start automatically when additional originals are placed. You can end scanning
and begin sending by pressing the [ ] key.
Even if originals are placed on the exposure glass, the machine will operate according to the specified
settings. However, every time originals are placed on the exposure glass, you must press the [Start]
key to start scanning.
If a paper misfeed occurs or any of the following operations are performed while the machine is
waiting for additional originals, the countdown stops and does not start again until the [ ] key is
pressed.
• Changing the settings such as the scan settings
• Opening the upper cover of the ADF
• Pressing the [Interrupt] key to activate the copy mode
Background Density of ADS (Full Colour)
Characteristics due to the type of paper such as nonwhiteness like newspaper or transparent originals
7
can be reduced by correcting the scanning density.
The default setting is the middle of 5 adjustment levels.
160
Advertisement
Table of Contents
