Edit - Toshiba e-studio905 Operating Instructions Manual

6. Various Scan Settings
1. Original Size (X1 and Y1)
Specify the original's entire size.
Enter the actual values in [X1] and [Y1] while referring to "How to measure sizes", and then press the [ ] key.
2. Start Position (X2 and Y2)
Specify the scanning start position.
Enter the actual values in [X2] and [Y2] while referring to "How to measure sizes", and then press the [ ] key.
3. Scan Area (X3 and Y3)
Specify sizes of the area you want to scan.
Enter the actual values in [X3] and [Y3] while referring to "How to measure sizes", and then press the [ ] key.
• When scanning originals using [Custom Size], you cannot enter specific values in [Original Size] and
[Start Position]. To configure the scan area, specify [Scan Area] and [Start Position] first, and then
[Original Size].
• For details about how place originals, see "Setting of Original Feed Type".
6
• p.130 "Setting of Original Feed Type"

Edit

Make editing settings.
[Erase Border]
Deletes the borders of the scanned original according to the specified width.
If you select [Same Width], you can specify a uniform width for deletion all around the original (top,
bottom, left, and right sides). If you select [Different Width], you can specify a different width for
deletion for each side.
128