Punch Module; Finisher Installed - Sharp MX-4140N Operation Manual

USER'S MANUAL - OPERATIONS COMMON TO ALL MODES

PUNCH MODULE

Overview
This device can be installed on a finisher or saddle finisher to punch
holes in paper to be output.
Discarding punch waste
Punch waste from punched holes is collected in the punch waste box.
Follow the operation procedure to replace punch waste.
Operation
•

Finisher installed

• Finisher (large stacker) installed
• Saddle finisher installed
• Saddle finisher (large stacker) installed
Finisher installed
Open the cover.
Grasp the punch waste box handle, gently pull out the box,
and discard the punch waste.
file://C:\Files\PM Files\COPIERS\CR3.5\Virgo II\Manuals downloaded from MFP\mx514...
Page 47 of 227
4/24/2014