USER'S MANUAL - COPY
MANUAL RATIO SELECTION
Overview
This section explains how to specify any ratio when making a copy on
paper that has a size different from the original or changing the
image size for copying.
The following three methods can be used to specify the ratio.
•
Using the preset ratio key
Specify any ratio by combination of preset ratio key, for which
the enlargement and reduction ratio values are pre-registered
between the frequently used standard sizes, with the zoom key,
which allows you to adjust the ratio in 1% units like
Up to two ratio values can be added to preset ratio keys,
respectively for enlargement and reduction.
•
Specifying the paper size
Specify the paper sizes of the original and output to
automatically obtain the appropriate ratio.
•
Specifying the image dimensions
Specify the image sizes of the original and output to
automatically obtain the appropriate ratio.
To make a copy with the same ratio between the vertical and
file://C:\Files\PM Files\COPIERS\CR3.5\Virgo II\Manuals downloaded from MFP\mx514...
Page 42 of 231
.
4/24/2014