Olivetti d-COLOR MF3300 Maintenance Manual page 84

4
Message
[Document Registration
Overload]
[Memory full (FAX)]
[ADF Initialize Error]
[Check Scanner Lock Lever]
[Job Registration Limit Over]
[Connection Failed]
[Writing Error]
[Matching paper size not
available.]
[Out of the Range of Auto
Zoom]
[Place Original on Glass]
[Place Original on ADF]
[Duplex Copy Disabled]
[Scan TX Failed]
[Off-Hook]
[Fax TX Failed]
[Fax RX Failed]
[I-Fax TX Failed]
[I-Fax RX Failed]
[I-Fax RX Data Error]
[E-mail forwarding failed.]
[PC-FAX Restricted]
[PC-Fax TX Error]
[Polling RX Error]
4-18
Description
The number of files on the HDD
has reached the upper limit.
The fax data storage area has
become full.
The ADF cover is not set secure-
ly.
The Scanner Lock Lever is
locked.
The number of registered jobs
has reached the upper limit.
Failed to connect to the FTP
server.
An error has occurred while sav-
ing data onto a USB memory de-
vice.
Paper appropriate for a print job
is not loaded in the tray.
The auto zoom ratio setting ex-
ceeds the allowable range.
The original of an invalid size is
loaded on the ADF.
No original is loaded on the ADF.
The size of the loaded paper is
not available for 2-sided copy.
Scan transmission has failed.
The handset remains picked up
after a manual transmission.
Fax transmission has failed.
Fax receiving has failed.
An error occurred while sending
an Internet fax, and the job was
not ended normally.
An error occurred while receiving
an Internet fax, and the job was
not ended normally.
The received Internet fax data is
destroyed, or it was not config-
ured in the TIFF format.
An error occurred while forward-
ing the received fax by E-mail,
and the job was ended normally.
PC-Fax TX is prohibited.
An error occurred when PC-Fax
TX data was received on this ma-
chine.
Multiple destinations have been
specified for Polling RX.
Major messages and actions
Remedy
Delete data saved on the HDD, if
necessary.
When sending fax data, send only
the scanned original, or manually
send it again.
When receiving fax data, print or de-
lete data saved in memory.
Open the ADF cover once, then
close it again.
Cancel the job, then release the
Scanner Lock Lever.
Wait until a job has been completed,
or delete a current job.
Check that the destination has been
registered correctly.
Cancel the job, then check that the
USB memory is in the write enable
state.
Load the appropriate paper in the
tray, then specify the correct size
and type for the loaded paper on the
Control Panel.
Specify the zoom ratio between 25
and 400%.
Scan the original from the Original
Glass.
Load the original on the ADF.
Scan the original of different sizes
from the ADF.
Cancel 2-sided copy, or change the
paper size.
After a while, cancel the job.
Replace the handset.
This error is remedied automatically.
This error is remedied automatically.
This error is remedied automatically.
This error is remedied automatically.
This error is remedied automatically.
This error is remedied automatically.
Enable PC-Fax TX.
This error is remedied automatically.
Multiple destinations cannot be
specified for Polling RX. Specify only
one destination.
d-Color MF 3300/3800
4.8