Appendix 2 Processing Time (Reference) - Mitsubishi MELSEC-Q EQ-V680D1 User Manual

APPENDICES

APPENDIX 2 PROCESSING TIME (REFERENCE)

Sequence program
ID command execution
request (Y14, Y1C)
Y signal output
ID instruction complete
(X4, XC)
X signal input
App - 3
The processing time is the time from the moment the ID instruction execution request
(Y14, Y1C) is turned ON to the time ID instruction complete (X4, XC) turns OFF.
0 step
(1) EEPROM type (1kbytes): V680-D1KP
Communication
Speed Setting
Read
Standard mode Write (with verify)
Write (without verify)
Read
High-speed
Write (with verify)
1
mode *
Write (without verify)
*1. When FIFO trigger, FIFO repeat, multi-trigger, or multi-repeat is specified in the
communication specification area, the processing time becomes the standard mode
processing time, even if the communication speed setting is high-speed mode.
Processing Time
END
Execution request
Command Processed Bytes
Number of
Processing Time (ms)
S: Scan Time (ms)
(byte)
100 169 + 2 × S
256 372 + 2 × S
512 705 + 2 × S
1,000 1339 + 2 × S
100 289 + 2 × S
256 637 + 2 × S
512 1208 + 2 × S
1,000 2296 + 2 × S
100 257 + 2 × S
256 559 + 2 × S
512 1053 + 2 × S
1,000 1994 + 2 × S
100 137 + 2 × S
256 293 + 2 × S
512 549 + 2 × S
1,000 1037 + 2 × S
100 241 + 2 × S
256 525 + 2 × S
512 991 + 2 × S
1,000 1879 + 2 × S
100 206 + 2 × S
256 442 + 2 × S
512 829 + 2 × S
1,000 1565 + 2 × S
App - 3