Document Insertion Slot And Ruler - Oce 4700 Series Installation Manual

Document insertion slot and ruler

The document insertion slot shown on the previous page is marked with a
measurement ruler from 0 to 8.5. The divisions correspond to the Scan Width
settings in the Power Scan software.
The following table shows common ISO and ANSI document widths and their
required Scan width settings. Note that the minimum media size the scanner
can handle is 6.0" (152 mm).
Scan-Width
1.4
2.
2.6
2.8
3.
3.9
4.
5.2
5.5
6.
7.8
8.
8.5
The required setting for an original drawing can be measured on the printed
ruler when the document is placed in the insertion slot.
Operation and Upkeep
Minimum scan width (A5)
A-Size (letter) and approx. A4
B-Size (11")
A3 (297 mm)
Approx. A3 and approx. B-Size
A2 (420 mm)
C-Size and approx. A2
D-Size (22")
A1 (595 mm)
Approx. A1 and approx. D-Size
A0 (841 mm)
E-Size and approx. A0
Max. scan width
Max. media size handled
Document width
6.0"
8.5"
11.0"
11.9"
12.7"
16.5"
17.0"
22.0"
23.3"
25.4"
33.1"
34.0"
36.0"
40.0"
152 mm
216 mm
280 mm
302 mm
323 mm
420 mm
430 mm
560 mm
592 mm
646 mm
840 mm
862 mm
914 mm
1016 mm
21