[8] Inserting a document
Abort Scanning key
You can cancel the scanning in process either from your computer software or by
pressing the Abort Scanning key. Note that once a scan has been canceled, it has to
be resumed from the beginning.
Call Service Indicator
This indicator flashes if the scanner detects a fatal error. Call
your local Océ service office to deal with the problem.
If the
and the
indicators flash at the same
Call Service
Warm-up
time, the amount of light captured by the scanner cameras is too
low. The camera height and range need to be adjusted. Refer to
'Camera out-of-light error' on page 29 for instructions.
20
4700 Series Scanners Installation Manual