Assembling the 4700 Series scanner
Mounting the scanner base and legs
Lay the scanner base on its side and attach the right leg to the right hand side
1
of the base using 2 of the short screws and the Allen wrench provided, as
shown in Figure 2. The right leg has an extra bolt at the bottom to differentiate
it from the left leg. The black plastic hole on each leg should face the back.
Now attach the left leg using the remaining 2 short screws.
2
Stand the scanner base upright with the black plastic holes in the legs towards
3
the back.
[2] Attaching the leg to the base
Assembly and Installation
11