Table of Contents
Advertisement
52
Finalizing the Installation
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1
Remove the glass (see page 45). Remove the logs and coals (if installed - page 47). Remove
the grate and firebacks (see page 47).
2
Remove the burner (see illustration below).
Remove the four screws
holding the burner
assembly in place.
Slide the burner to the
left and up to remove.
Travis Industries
NOTE: The front of the burner support is
removable. It may be removed to aid in burner
alignment during re-assembly.
4080214
(for qualified installers only)
100-01182_003
Advertisement
Table of Contents
