JVC RX-9010VBK Instructions Manual page 73

After pressing DVD
MENU (only for the
main room operations),
these buttons can be
used for the DVD
menu operations.
Note:
For detailed menu operations, refer to the instructions supplied with
the discs or the DVD player.
Note:
Refer to the manual supplied with your DVD player.
5. Try to operate your DVD player by pressing one
of the above buttons.
• DO NOT forget to turn on the DVD player before pressing
one of the above buttons.
If there are more than one code listed for your brand of DVD
player, try each one until the correct one is entered.
To change the transmittable signals for
operating a CD player
1. Press and hold AUDIO POWER ON.
2. Press CD.
3. Enter manufacturer's code using buttons 1–9,
and 0.
See page 71 to find the code.
4. Release AUDIO POWER ON.
After pressing CD (with the remote control mode selector set to
"TV"), you can perform the following operations on a CD
player:
1 – 9, 0, +10: Selects the tracks.
PLAY:
Starts playing.
4:
Returns to the beginning of the current (or
previous) track.
¢:
Skips to the beginning of the next track.
STOP: Stops playing.
PAUSE:
Stops playing temporarily. To release it, press
PLAY.
Note:
Refer to the manual supplied with your CD player.
5. Try to operate your CD player by pressing one of
the above buttons.
• DO NOT forget to turn on the CD player before pressing one
of the above buttons.
If there are more than one code listed for your brand of CD,
try each one until the correct one is entered.
TEXT
MENU
DISPLAY
SET
DVD
EXIT
MENU
Manufactures' codes for TV
Manufacturer
JVC
FISHER
HITACHI
MAGNAVOX
METS
MITSUBISHI
PANASONIC
PHILIPS
QUELLE
RCA/PROSC
SAMSUNG
SANYO
SHARP
SONY
TOSHIBA
ZENITH
*This figure is set to the remote control as the initial JVC cord.
Manufactures' codes for DBS tuner
Manufacturer
JVC
AMSTRAD
BLAUPUNKT
ECHOSTAR
GOLDSTAR
GRUNDIG
HIRSHMANN
INSTRUMENT
ITT/NOKIA
KATHREIN
NEC
ORBITECH
PHILIPS
RCA
SAMSUNG
SCHWAIGER
SIEMENS
SONY
TECHNISAT
*This figure is set to the remote control as the initial JVC cord.
Note:
Manufacturers' codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
Codes
00*, 14, 74
05
08, 09, 10, 49
08, 17, 49
50, 51, 52, 53
08, 18
24, 26, 76
17
52, 53, 54, 55, 56, 57, 58,
59, 60, 61, 62, 63, 64, 65,
66, 67
08, 24, 29, 30, 31, 48
08, 34, 49
05
38, 77
39
37, 43
45, 46
Codes
56, 57*, 67
43, 44, 45, 46, 47, 48, 49
30
50, 51, 67
31
32, 33
48, 52, 53, 54, 55
68
34
52, 58, 59, 60, 61, 62, 63
35, 36
48
37, 38
65
39, 40
61, 64
41, 42
66
48
Continued to the next page.
70