Installation Procedure - Ricoh A284 Service Manual

PUNCH UNIT INSTALLATION

3.11.2 INSTALLATION PROCEDURE

[B]
A284I761.WMF

CAUTION
Unplug the copier power cord and remove the 3,000-sheet finisher from the
copier before starting the following procedure.
1. Unpack the punch unit and remove the shipping retainers [A] (4 screws) and [B]
(1 screw).
2. Open the front door and remove the hopper cover [C] (2 screws).
3. Remove the finisher rear cover (2 screws) and remove the transport guide plate
[D] (4 screws).
A283/A284
[A]
[C]
3-40
[D]
A284I763.WMF
SM