Ram Clear (Function); Fcu Reboot; Service Station Fax Number (Function) - Ricoh A284 Service Manual

SERVICE LEVEL FUNCTIONS
4.1.14 RAM CLEAR (FUNCTION 07)
1. Enter the fax service mode.
2. Press - 4.
3. Press one of the following numbers, as required:
. Initializes the bit switches and user parameters, user data in the SRAM,
files in the SAF memory, and the clock.
/ Erases all the files stored in the SAF memory.
0 Resets the bit switches and user parameters.
1 Initializes the bit switches and user parameters, user data in the SRAM,
and files in the SAF memory.
4. The machine automatically returns to standby mode after self-initialization.

4.1.15 FCU REBOOT

To initialize the fax unit without erasing files or resetting the bit switches, do one of
the following:
• Hold down the "Speed Dial" key for more than 10 s, while the machine is in
facsimile mode. This initializes the fax unit only.
• Remove the rear cover and press SW2 on the FCU. This initializes the fax unit
only.
• Turn off the main power and operation switches and turn them back on. This
initializes the whole machine.
• Hold down the 7 and 8 keys for more than 10 s. This initializes the whole
machine.
4.1.16 SERVICE STATION FAX NUMBER (FUNCTION 09)
1. Enter the fax service mode.
2. Press - 6.
3. Enter the fax number of the service station that
will receive Automatic Service Calls from this
machine. To use a G4 number, press the "F4"
key.
4. Press "OK".
5. Exit the service mode.
A874 4-8
A874M521.BMP
A874M522.BMP
SM