SERVICE LEVEL FUNCTIONS
4.1.10 PC PROTOCOL DUMPLIST (FUNCTION 05)
NOTE: An optional PC fax expander board (PCFE) is required to print the PC
protocol dump list.
1. Enter the fax service mode.
2. Press - 2.
3. Press 0 then E.
4. Exit the service mode.
4.1.11 RAM DISPLAY AND REWRITE (FUNCTION 06)
1. Enter the fax service mode.
2. Press - 3.
3. Press ..
4. Enter the start address of the RAM area to
be displayed, then press "OK".
5. Move the cursor to the target address using
the arrow keys, then enter a new value (0-9:
Ten-key pad, A-F: Quick Dial keys).
6. To scroll through the RAM addresses: Press
"Prev". or "Next".
To jump to an another address: Press "OK", and go back to step 3.
7. Exit the service mode.
A874
4-6
A874M511.BMP
A874M514.BMP
A874M515.BMP
A874M516.BMP
A874M517.BMP
SM