Error Messages During The Software Download - Ricoh A284 Service Manual

DOWNLOADING NEW SOFTWARE

4.2.2 ERROR MESSAGES DURING THE SOFTWARE DOWNLOAD

If downloading failed, one of the following error messages appears. At this time,
press the "CONFIRM" bottom in the display to re-try the download.
Message
SYS Erasing Failed ADDR:XXXXXXXX
SYS Writing Failed ADDR:XXXXXXXX
SYS Verify Failed ADDR:XXXXXXXX
APL Erasing Failed ADDR:XXXXXXXX
APL Writing Failed ADDR:XXXXXXXX
APL Verify Failed ADDR:XXXXXXXX
NIC board is not equipped
NIC Initialization failed. CODE:XXXX
NIC Download mode is disable
NIC Writing Failed ADDR:XXXXXXXX
NIC Host Service Error CODE:XXXX
B359
Re-try the download. If the download fails
again, replace the scanner controller.
Re-try the download. If the download fails
again, replace the scanner controller.
Check whether the STP cable is
disconnected. If it is connected, disconnect
the cable and re-try the downloading.
8-14
Action
SM