Installation Procedure - Ricoh A284 Service Manual

3.5.2 INSTALLATION PROCEDURE

[A]
NOTE: The Interchange Unit (A690) must be installed before installing the 1-bin
tray unit.

CAUTION
Unplug the main machine power cord before starting the following
procedure.
1. Remove the scanner unit.
NOTE: If the ARDF is installed, remove the ARDF before removing the
scanner unit.
1) Remove the stand rear cover [A] (2 screws).
2) Disconnect the scanner I/F board [B] and the power connector [C].
3) Disconnect the harness [D].
4) Disconnect the scanner I/F harness [E].
SM
[B]
[E]
[C]
3-17
1-BIN TRAY UNIT INSTALLATION
[D]
A684I001.WMF
A283/A284