Throttle Control; Front Brake Control; Ignition Switch - Husqvarna NUDA 900 MY12 Operating & Maintenance Instructions

THROTTLE CONTROL

The throttle twistgrip (1) is located on the right-hand side
of the handlebar. The position of the control on the han-
dlebar can be adjusted by loosening the two retaining
screws (2).
CAUTION*:
Do not forget to tighten the screws (2)
after adjusting.
2
1
EN - 16 SPECIFICATIONS - OPERATION - MAINTENANCE

FRONT BRAKE CONTROL

The brake control lever (1) is located on the right-hand
side of the handlebar. The position of the control on the
handlebar can be adjusted by loosening the two retain-
ing screws (2).
WARNING*:
After adjustment, turn the handlebar as
far as possible to the right and make
sure that the lever does not touch the
bodywork.
A stop switch, during the braking action, causes the stop
light on the tail light to come on.
CAUTION*:
Do not forget to tighten the screws (2)
after adjusting.
2
2

IGNITION SWITCH

The ignition switch has three positions:
"OFF" position:
Key removal and engine stop positions
"ON" position:
From the OFF position, turn the key (1) counterclockwise
to the ON position; the ignition, parking lights and utili-
ties are activated and the engine can be started;
" " position:
Steering lock position (see steering lock)
1
1