Husqvarna NUDA 900 MY12 Operating & Maintenance Instructions page 29

- Turn the saddle locking screw 90° counterclockwise
using the wrench (2).
2
- Remove the saddle (3) by lifting it up at the back
and slide it towards the rear of the vehicle by un-
hooking it off the front brackets.
- Lift the flap (4), insert the key (5), turn it counter-
clockwise and remove the tank cap (6).
6
- Remove the right-hand side panel (9) by unscrewing the screws (10).
3
5
4
10
SPECIFICATIONS - OPERATION - MAINTENANCE
- Remove the air box cover (7) by unscrewing the
screws (8).
8
9
8
7
10
EN - 29