Setting Parameters; Con Function; Changing Ecu Mapping; Trip Function - Husqvarna NUDA 900 MY12 Operating & Maintenance Instructions

Setting parameters

With the dashboard on, press the "S" button (1) to dis-
play the various display functions:
ODO ; TRIP ; TEMP ; CON ; CLOCK
1
The "ODO", "TEMP" and "CLOCK" functions are for dis-
play purposes only.

TRIP function:

When this function is activated, press the "S" button for
more than 4 seconds to reset and start a new partial
count of the kilometres /miles subsequently travelled.
When this function is set after the fuel reserve light has
come on, press the "S" button "S" (1) for more than 4
seconds to display fuel consumption (in litres or gallons
depending on the unit of measurement you have select-
ed) from when you go onto fuel reserve.
1

CON function:

When this function is activated, press the "S" button for
more than 4 seconds to reset and start a new count of the
litres/ gallons consumed from when average consump-
tion (L/100 km) has been reset.
SPECIFICATIONS - OPERATION - MAINTENANCE

Changing ECU mapping:

The vehicle leaves the factory in "STANDARD" configura-
tion, i.e, with maximum power.
Motorcycle performance can be changed from "STAND-
ARD" to "RAIN" by pressing the "M" button (1) on the
dashboard.
The map can be changed when the vehicle is moving
(key turned to "ON") or stationary.
Press the "M" button for more than 3 seconds:
if the vehicle is moving, "MAP II" flashes intermittently
on the display and the "RAIN" configuration is activated
as soon as the accelerator is completely closed ("MAP II"
permanently lit on the display) whereas if the vehicle is
stationary, "MAP II" appears permanently lit after press-
ing the "M" button for more than 3 seconds.
To go from "RAIN" to "STANDARD" mapping, proceed in
the same way.
In "STANDARD" mode, there is no indication on the dis-
play.
When the vehicle is off (key turned to "OFF") the current
mapping is always maintained.
1
EN - 15