Husqvarna NUDA 900 MY12 Operating & Maintenance Instructions page 31

- Remove the air box cover (6) by unscrewing the
screws (7).
7
- Disconnect connector (8) of the air temperature sen-
sor.
- Unscrew the two screws (9) that fasten the side pan-
els at the front.
9
- Unscrew the screws (10) on the filter cover (11) and
remove it.
7
10
6
- Clean the area around the filter (12) before removing
it.
8
- Remove the filter (12), check that it is not clogged and
replace if necessary.
CAUTION*:
Before refitting the filter, check that the
11
contact surfaces between the filter, the
filter box and the cover are completely
clean.
10
12
SPECIFICATIONS - OPERATION - MAINTENANCE
12
EN - 31