Before Using The Machine; Operation Panel - Canon PIXMA MX700 series Quick Start Manual

Before Using the Machine
Operation Panel
(1) (2) (3) (4) (5)(6)(7)(8) (9) (10)(11)(12)(13) (14) (15) (16)
(25) (24) (23) (22) (21) (20)(19)
o
o
00
00
(18) (17)
2
(1) ON/OFF button / Power lamp
Turns the machine on and off. Lights or flashes green to indicate the power status. Before
turning on the machine, make sure the Document Cover is closed.
m
Note
• The machine cannot receive faxes when the power is turned off.
• The power cannot be turned off while the machine is sending or receiving a fax, or when
there are unsent faxes stored in the machine's memory.
(2) COPY button
Switches the machine to copy mode.
(3) FAX button
Switches the machine to fax mode.
(4) SCAN button
Switches the machine to scan mode. In scan mode, the machine scans a document to
your computer according to the settings selected. To use this button, the machine must
be connected to a computer. For details, refer to the Scanning Guide on-screen manual.
(5) MEMORY CARD button
Switches the machine to memory card mode.
(6) In Use/Memory lamp
Flashes when the telephone line is in use. Lights when there are documents stored in the
machine's memory.
(7) Enlarge/Reduce button
Sets the enlargement or reduction ratio for copying.
(8) Alarm lamp
Lights or flashes orange when an error, such as paper-out or ink-out, occurs.
(9) LCD (Liquid Crystal Display)
Displays messages, menu selections, and the operational status.
(10) • •
~
• buttons
Scrolls through menu selections and increases/decreases setting values, such as the
number of copies. You can use these buttons when . , . ,
~,
and. are displayed on
the LCD. Also, the
~
button cancels the entered character, and the. button enters a
space between characters when entering characters.
Before Using the Machine
Before Using the Machine
Operation Panel
(1) (2) (3) (4) (5)(6)(7)(8) (9) (10)(11)(12)(13) (14) (15) (16)
(25) (24) (23) (22) (21) (20)(19)
o
o
00
00
(18) (17)
2
(1) ON/OFF button / Power lamp
Turns the machine on and off. Lights or flashes green to indicate the power status. Before
turning on the machine, make sure the Document Cover is closed.
m
Note
• The machine cannot receive faxes when the power is turned off.
• The power cannot be turned off while the machine is sending or receiving a fax, or when
there are unsent faxes stored in the machine's memory.
(2) COPY button
Switches the machine to copy mode.
(3) FAX button
Switches the machine to fax mode.
(4) SCAN button
Switches the machine to scan mode. In scan mode, the machine scans a document to
your computer according to the settings selected. To use this button, the machine must
be connected to a computer. For details, refer to the Scanning Guide on-screen manual.
(5) MEMORY CARD button
Switches the machine to memory card mode.
(6) In Use/Memory lamp
Flashes when the telephone line is in use. Lights when there are documents stored in the
machine's memory.
(7) Enlarge/Reduce button
Sets the enlargement or reduction ratio for copying.
(8) Alarm lamp
Lights or flashes orange when an error, such as paper-out or ink-out, occurs.
(9) LCD (Liquid Crystal Display)
Displays messages, menu selections, and the operational status.
(10) • •
~
• buttons
Scrolls through menu selections and increases/decreases setting values, such as the
number of copies. You can use these buttons when . , . ,
~,
and. are displayed on
the LCD. Also, the
~
button cancels the entered character, and the. button enters a
space between characters when entering characters.
Before Using the Machine