Canon PIXMA MX700 series Quick Start Manual page 188

Macintosh® Software Installation
rn Note
• Since Mac<!>
as
9, Mac
as x
Classic environments, or Mac
as x
v.10.2.7 or earlier
are not supported, do not connect the machine to these.
• The screens below refer to Mac
as x
v.1
OA.x
installation. Screens may vary
depending on the operating system you are using.
• Log on as an Administrator.
• Before installing the software, disable all anti-virus programs and automatically
loading programs.
o
Connect one end of the USB cable to the computer and the
other to the machine.
rnNote
Make sure the machine is turned on.
f}
Turn on your Mac and insert the Setup CD-ROM.
rn Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
on the desktop.
€)
Double-click the Setup icon.
o
When the Authenticate screen appears, enter your
administrator name and password. Click OK.
If you do not know your administrator name or password, click
?,
then follow the on-screen instructions.
o
When the main menu appears, click Easy Install.
The MP Drivers, On-screen Manuals, and application software are installed
automatically.
.....
....
__
.....
_
.......
_
........
rn Note
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed with the installation.
o
When the list of applications to install appears, confirm the
contents, then click Install.
rnNote
Move the cursor over items to display explanations of each application.
o
Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
o
When the Setup Complete screen appears, click Next.
€)
When the User Registration screen appears, click Next.
rn Note
To register later, click Cancel and go to Step
lID.
After software installation is complete,
double-click on the desktop.
Follow on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the machine. See
Step 1-
0
on the front page.
®
When the Installation completed successfully screen
appears, click Restart.
1~1
The system is restarted automatically.
When using Mac OS X v.10.2.8 to v.10.3.3:
Restarting the computer while connected to the machine may cause the
machine not to be detected. To resolve this, either unplug the USB cable
then plug it back in again, or turn the machine off then back on again.
rn Note
• When using Mac
as
x
v.1 0.2.8 to v.1 0.3.x, before using the Operation Panel on
the machine to save originals scanned from the Platen Glass or the ADF to the
computer, it is necessary to select MP Navigator EX as the launch application on
Image Capture under Applications folder. For details, refer to "Scanning Images"
in the User's Guide on-screen manual.
• If straight lines are misaligned or print quality is not satisfactory after installing the
MP Drivers, you may need to align the Print Head. Refer to "Aligning the Print
Head" in the Quick Start Guide.
• XXX FAX (where "XXX" is your machine's name) is shown in the Printer Name list
(Product list in Mac
as x
v.1 0.2.8 to v.1 0.3.x), but you cannot add XXX FAX. You
can fax the document with the current print settings applied to it if your computer is
equipped with an internal modem. You cannot send faxes from your computer via the
machine.
ID
When the Canon IJ Network Tool screen appears, select
USB connection, then click OK.
" .... " 0 ...... ....... _ . . _ .... _ _ _
_ _ tou•• , ",1nI"_~'~'_"""
.......
IUSI.__.....l_'_
<IJ<.IOltIT """""" .
If .......... ' ' _ h . t N O _ - . ..II.. [1.A.'l _ _
'1Itf\<II<~IOOl~Tho" _ M l.....
Software installation is now complete.
Nindows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries.
072007YT PRINTED IN THAILAND
Macintosh® Software Installation
rn Note
• Since Mac<!>
as
9, Mac
as x
Classic environments, or Mac
as x
v.10.2.7 or earlier
are not supported, do not connect the machine to these.
• The screens below refer to Mac
as x
v.1
OA.x
installation. Screens may vary
depending on the operating system you are using.
• Log on as an Administrator.
• Before installing the software, disable all anti-virus programs and automatically
loading programs.
o
Connect one end of the USB cable to the computer and the
other to the machine.
rnNote
Make sure the machine is turned on.
f}
Turn on your Mac and insert the Setup CD-ROM.
rn Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
on the desktop.
€)
Double-click the Setup icon.
o
When the Authenticate screen appears, enter your
administrator name and password. Click OK.
If you do not know your administrator name or password, click
?,
then follow the on-screen instructions.
o
When the main menu appears, click Easy Install.
The MP Drivers, On-screen Manuals, and application software are installed
automatically.
.....
....
__
.....
_
.......
_
........
rn Note
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed with the installation.
o
When the list of applications to install appears, confirm the
contents, then click Install.
rnNote
Move the cursor over items to display explanations of each application.
o
Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
o
When the Setup Complete screen appears, click Next.
€)
When the User Registration screen appears, click Next.
rn Note
To register later, click Cancel and go to Step
lID.
After software installation is complete,
double-click on the desktop.
Follow on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the machine. See
Step 1-
0
on the front page.
®
When the Installation completed successfully screen
appears, click Restart.
1~1
The system is restarted automatically.
When using Mac OS X v.10.2.8 to v.10.3.3:
Restarting the computer while connected to the machine may cause the
machine not to be detected. To resolve this, either unplug the USB cable
then plug it back in again, or turn the machine off then back on again.
rn Note
• When using Mac
as
x
v.1 0.2.8 to v.1 0.3.x, before using the Operation Panel on
the machine to save originals scanned from the Platen Glass or the ADF to the
computer, it is necessary to select MP Navigator EX as the launch application on
Image Capture under Applications folder. For details, refer to "Scanning Images"
in the User's Guide on-screen manual.
• If straight lines are misaligned or print quality is not satisfactory after installing the
MP Drivers, you may need to align the Print Head. Refer to "Aligning the Print
Head" in the Quick Start Guide.
• XXX FAX (where "XXX" is your machine's name) is shown in the Printer Name list
(Product list in Mac
as x
v.1 0.2.8 to v.1 0.3.x), but you cannot add XXX FAX. You
can fax the document with the current print settings applied to it if your computer is
equipped with an internal modem. You cannot send faxes from your computer via the
machine.
ID
When the Canon IJ Network Tool screen appears, select
USB connection, then click OK.
" .... " 0 ...... ....... _ . . _ .... _ _ _
_ _ tou•• , ",1nI"_~'~'_"""
.......
IUSI.__.....l_'_
<IJ<.IOltIT """""" .
If .......... ' ' _ h . t N O _ - . ..II.. [1.A.'l _ _
'1Itf\<II<~IOOl~Tho" _ M l.....
Software installation is now complete.
Nindows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries.
072007YT PRINTED IN THAILAND