Using Other Useful Sending Functions - Canon PIXMA MX700 series Quick Start Manual

• Redialing
There are two methods of redialing: Manual redialing and Automatic redialing. Automatic
redialing is enabled by default.
• Automatic Redialing
When using memory sending to send a document and the recipient's line is busy, the
machine will redial the number after a specified interval.
You can customize the following automatic redialing settings:
• Whether or not your machine redials automatically
• The number of times the machine redials (1 to 10 times)
• The time interval between redials (1 to 99 minutes)
To change the automatic redialing settings, change the Auto redial settings in TX settings
under the FAX settings screen.
W
Note
• The range of values you can set for the automatic redia ling settings varies depending on
the country or region of purchase.
• To cancel automatic redialing while redialing is in progress, press the Stop/Reset button
and follow the instructions on the LCD.
• To cancel automatic redialing when redialing is standing by, delete the unsent document
from the machine's memory. For details, see "Deleting a Document in Memory" on
page 75.
• Manual Redialing
To redial the fax number last dialed with the Numeric buttons, press the Redial/Pause button.
W
Note
• For details on sending faxes, see "Sending Faxes (Memory Sending)" on page 61.
• To cancel manual redialing, press the Stop/Reset button.
Using Other Useful Sending Functions
• Sending from Your Computer (Windows Only)
If your machine is connected to a computer, you can send faxes using the fax driver from any
application software that has a printing function. For details, refer to the FAX Driver Guide on-
screen manual.
• Sending/Receiving Using ECM
This machine is set to send/receive faxes in ECM (Error Correction Mode). ECM automatically
corrects errors caused by connection troubles, cross-checking the sending and receiving
conditions at the sending and receiving ends.
W
Note
• If the sender's or receiver's fax is not ECM-compatible, the fax will be senUreceived in the
standard mode.
• You can disable ECM sending/receiving. Refer to "ECM TX" and "ECM RX" in "Device Settings"
of the User's Guide on-screen manual.
• Transmission may take longer when ECM is enabled.
64
Faxing
• Redialing
There are two methods of redialing: Manual redialing and Automatic redialing. Automatic
redialing is enabled by default.
• Automatic Redialing
When using memory sending to send a document and the recipient's line is busy, the
machine will redial the number after a specified interval.
You can customize the following automatic redialing settings:
• Whether or not your machine redials automatically
• The number of times the machine redials (1 to 10 times)
• The time interval between redials (1 to 99 minutes)
To change the automatic redialing settings, change the Auto redial settings in TX settings
under the FAX settings screen.
W
Note
• The range of values you can set for the automatic redia ling settings varies depending on
the country or region of purchase.
• To cancel automatic redialing while redialing is in progress, press the Stop/Reset button
and follow the instructions on the LCD.
• To cancel automatic redialing when redialing is standing by, delete the unsent document
from the machine's memory. For details, see "Deleting a Document in Memory" on
page 75.
• Manual Redialing
To redial the fax number last dialed with the Numeric buttons, press the Redial/Pause button.
W
Note
• For details on sending faxes, see "Sending Faxes (Memory Sending)" on page 61.
• To cancel manual redialing, press the Stop/Reset button.
Using Other Useful Sending Functions
• Sending from Your Computer (Windows Only)
If your machine is connected to a computer, you can send faxes using the fax driver from any
application software that has a printing function. For details, refer to the FAX Driver Guide on-
screen manual.
• Sending/Receiving Using ECM
This machine is set to send/receive faxes in ECM (Error Correction Mode). ECM automatically
corrects errors caused by connection troubles, cross-checking the sending and receiving
conditions at the sending and receiving ends.
W
Note
• If the sender's or receiver's fax is not ECM-compatible, the fax will be senUreceived in the
standard mode.
• You can disable ECM sending/receiving. Refer to "ECM TX" and "ECM RX" in "Device Settings"
of the User's Guide on-screen manual.
• Transmission may take longer when ECM is enabled.
64
Faxing