Canon PIXMA MX700 series Quick Start Manual page 123

The machine is not connected properly. , Make sure that the USB cable is securely plugged in to the machine and the
I
computer.
• If you are using a relay device such as a USB hub, disconnect it, connect the
machine directly to the computer, and try printing again. If printing starts
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
• There could also be a problem with the USB cable. Replace the USB cable
and try printing again.
When you use the machine over LAN, make sure that the machine is connected
to the network with a LAN cable and is set up correctly. Refer to "Checking
Information about the Network" in the User's Guide on-screen manual.
Your machine is not selected in Printer ' Select your machine's name in Printer on the Print dialog box.
on the Print dialog box. If your machine's name does not appear in Printer, follow the procedure below
to check that the driver for your machine is installed to your computer.
(1)Select Print & Fax Preferences in Printer.
In Mac OS X v.1 0.2.8 or 10.3.x, select Edit Printer List in Printer.
(2)Check that your machine's name is displayed in the list of printers and that
the check box is selected.
In Mac OS X v.1 0.2.8, check that your machine's name is displayed in
Printer List.
(3)lf your machine's name is not displayed, click Add(+) to add the machine.
If you cannot add the machine, follow the procedure described in your setup
sheet or the Network Setup Guide to reinstall the MP Drivers.
• Error No.: 1700/1710 Is Displayed
See ''''The waste ink absorber is almost fulL Press [OK] to continue but early
replacement recommended. <See manual>"" on page 102.
• Error No.: 2001 Is Displayed
No response from connected digital
camera or video camcorder. /
Connected digital camera or video
j
camcorder is not compatible with this
machine.
_ - L - - _
• Error No.: 2002 Is Displayed
PictBridge compliant device is
connected via a USB hub.
See ""An unsupported USB hub is connected. Remove the hub."" on page 102.
I
Troubleshooting 119
The machine is not connected properly. , Make sure that the USB cable is securely plugged in to the machine and the
I
computer.
• If you are using a relay device such as a USB hub, disconnect it, connect the
machine directly to the computer, and try printing again. If printing starts
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
• There could also be a problem with the USB cable. Replace the USB cable
and try printing again.
When you use the machine over LAN, make sure that the machine is connected
to the network with a LAN cable and is set up correctly. Refer to "Checking
Information about the Network" in the User's Guide on-screen manual.
Your machine is not selected in Printer ' Select your machine's name in Printer on the Print dialog box.
on the Print dialog box. If your machine's name does not appear in Printer, follow the procedure below
to check that the driver for your machine is installed to your computer.
(1)Select Print & Fax Preferences in Printer.
In Mac OS X v.1 0.2.8 or 10.3.x, select Edit Printer List in Printer.
(2)Check that your machine's name is displayed in the list of printers and that
the check box is selected.
In Mac OS X v.1 0.2.8, check that your machine's name is displayed in
Printer List.
(3)lf your machine's name is not displayed, click Add(+) to add the machine.
If you cannot add the machine, follow the procedure described in your setup
sheet or the Network Setup Guide to reinstall the MP Drivers.
• Error No.: 1700/1710 Is Displayed
See ''''The waste ink absorber is almost fulL Press [OK] to continue but early
replacement recommended. <See manual>"" on page 102.
• Error No.: 2001 Is Displayed
No response from connected digital
camera or video camcorder. /
Connected digital camera or video
j
camcorder is not compatible with this
machine.
_ - L - - _
• Error No.: 2002 Is Displayed
PictBridge compliant device is
connected via a USB hub.
See ""An unsupported USB hub is connected. Remove the hub."" on page 102.
I
Troubleshooting 119