I/O Subsystem Power Distribution Cabling; Integrated Battery Feature Locations - IBM pSeries 670 Service Manual

I/O Subsystem Power Distribution Cabling

Power to the I/O subsystems is connected from the bulk power distribution connectors to each subsystem
through cables. The cable connectors are labeled on each end. The following table describes the cables
that connect from the BPDs to the I/O Subsystem DCAs (power supplies).
From
A35B-BPD1A-P00
A35P-BPD1B-P00
A35B-BPD1A-P01
A35P-BPD1B-P01
A35B-BPD1A-P02
A35P-BPD1B-P02
A35B-BPD1A-P03
A35P-BPD1B-P03
A35B-BPD1A-P04
A35P-BPD1B-P04
A35B-BPD1A-P05
A35P-BPD1B-P05
The following 4 rows apply to systems that are not configured with 32-way with 1.7 GHz MCMs.

Integrated Battery Feature Locations

36 Eserver pSeries 670 Service Guide
To
(A=Primary)
A09B-DCA1-P01 BPD1A to I/O Subsystem
A09B-DCA1-P00 BPD1B to I/O Subsystem
A09B-DCA2-P01 BPD1A to I/O Subsystem
A09B-DCA2-P00 BPD1B to I/O Subsystem
A05B-DCA1-P01 BPD1A to I/O Subsystem
A05B-DCA1-P00 BPD1B to I/O Subsystem
A05B-DCA2-P01 BPD1A to I/O Subsystem
A05B-DCA2-P00 BPD1B to I/O Subsystem
A01B-DCA1-P01 BPD1A to I/O Subsystem
A01B-DCA1-P00 BPD1B to I/O Subsystem
A01B-DCA2-P01 BPD1A to I/O Subsystem
A01B-DCA2-P00 BPD1B to I/O Subsystem
1
1 Connector to BPR
Description
#1
#1
#1
#1
#2
#2
#2
#2
#3
#3
#3
#3
Label Color
Purple With Stripes
Purple
Purple With Stripes
Purple
Yellow With Stripes
Yellow
Yellow With Stripes
Yellow
Green With Stripes
Green
Green With Stripes
Green