Clarity WN-5220-S User Manual page 93

Wall Processor
Wall Size:
Horizontal: xxx
Vertical: xxx
Current Unit: xx
Misc:
[ ] Calc Wall Pos
[ ] Wall Mode
Save Config
# $ # $ [source]
# # $ $
# # # $ # $ [mode] $ $
Enter number of units in video wall horizontally
Enter number of unit is video wall vertically
Number of current unit, taken from Unit knob on rear panel
Select and press Enter to automatically calculate wall position of this
unit and turn on Wall Mode
Select and press Enter to turn Wall Mode on and off.
Left-right arrows select source to save:
All
PC
MAC
9-pin (RGBS)
BNC (RGBS)
C-video
S-video
Left-right arrows select mode to save:
Source Mode
All All [modes are saved for all sources]
PC All [PC modes are saved]
640x480
800x600
MAC All [MAC modes are saved]
640x480
800x600
832x624
RGBS 9-pin All [RGBS 9-pin modes are saved]
640x480
800x600
525/60Hz
625/50Hz
RGBS BNC All [RGBS BNC modes are saved]
640x480
800x600
525/60Hz
625/50Hz
Composite All [Composite modes are saved]
NTSC
PAL
SECAM
S-Video All [S-Video modes are saved]
NTSC
PAL
SECAM
WN-5220-S VideoWall User's Guide
85