Clarity WN-5220-S User Manual page 57

8. Set the Wall Size on each
display
Source Select
Frequency
Phase
Input Level
Position
Zoom
Wall Processor
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
If this unit does not have Big Picture,
you will see a menu like this:
The Big Picture option is not
installed. Please see the
About menu for contact
information on purchasing
the Big Picture option.
9. Put each display into Wall
Mode
WN-5220-S VideoWall User's Guide
Open the Wall Processor menu. Enter the horizontal
and vertical wall size. Each display's menu should
show the same horizontal and vertical wall size.
Each display should show a different Current Unit
value. This value represents its location in the wall.
If this unit has Big Picture,
you will see a menu like this:
Wall Processor
Wall Size:
Horizontal:
Vertical:
Current Unit:
Misc:
[ ] Calc wall pos
[ ] Wall mode
Move the menu cursor to the Calc wall pos line and
press the ENTER button. This calculates the position
of the selected display within the image and puts the
display into Wall Mode. Each display will now show
only its segment of the overall image.
Do this with each display in the wall and exit the Wall
Processor menu.
002
002
01
49