Clarity WN-5220-S User Manual page 66

Clarity Visual Systems
1. Press the MAIN MENU
button on the remote
2. Press the up/down
arrow keys
3. Press ENTER
4. Press left/right arrow
keys
5. Press ENTER
6. Press left/right arrow
keys
7. Press ENTER
June 1999
58
The Main menu is displayed.
Move the cursor to the Hours selection.
The Lamp Hours menu displays the current number of
lamp operating hours. Replace the lamp at 3000 hours.
This menu also shows total system hours.
Use the left or right arrow keys to highlight the Yes
selection.
Press the ENTER button to proceed in resetting the lamp
hours to zero.
At this point a warning will prompt 'Did You Replace The
Lamp?' If the lamp was replaced, use the left or right
arrow keys to highlight the Yes selection.
Press the ENTER button to proceed in resetting the lamp
hours to zero.