Clarity WN-5220-S User Manual page 56

Clarity Visual Systems
7. Set each display's address
June 1999
48
Assign each display a unique address using the Unit
ID knob. (The Group ID setting has no effect on Big
Picture.)
The address of the display in the upper left corner (as
seen from the front) must be zero. The addresses of
the other displays must increase left to right, top
bottom, increasing by one for each display. Therefore,
the display in the lower right corner (as seen from the
front) always has the highest address.
2x2 example $
(Seen from the
front)
3x3 example $
0 1
2 3
0 1 2
3 4 5
6 7 8