Transmission Disassembly / Assembly; Transmission Disassembly - Polaris A12MH46AX Service Manual

TRANSMISSION DISASSEMBLY /

ASSEMBLY
Transmission Disassembly
NOTE: Refer to the exploded view at the end of this
chapter as a reference.
1. Place the transmission
disassembly.
2. Drain and properly dispose of the transmission
lubricant (see Chapter 2).
3. Remove the shift rod from the bellcrank (B).
4. Remove the bellcrank nut (A) and bellcrank (B).
5. Remove the E-clip (C) that retains the gear selector
switch (D) and remove the switch.
6. Remove the sector cover bolts (E) and remove the
sector cover (F).
in Reverse before
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
NOTE: Removal can be aided by using your thumbs
to press down on the shafts while pulling up the
cover with your fingers.
7. Remove the compression spring (G).
8. Remove the detent star (H). Note how the detent star
fits onto the splined shaft with the raised edge facing
outward for reassembly.
9. Remove the lockout disc (I). Note the raised edge
facing outward for reassembly.
10. Remove the shift shaft (J), detent pawl (K) and the
shift gears (L and M).
IMPORTANT: Note the timing marks on the shift gears
(L and M) for reassembly purposes.
TRANSMISSION
8.11
8