Polaris A12MH46AX Service Manual page 379

TEST 5 - Reverse Speed Limiter / TEST 6 - Speed Sensor
TEST 6 - Vehicle Speed Sensor
Speed Sensor Location
The speed sensor is located on the RH transmission case
and can be accessed through the rear RH wheel well area.
Speed Sensor Testing
Special Tools Required:
Static Timing Light Harness (PN 2871745)
Hall Sensor Probe Harness (PN 2460761)
1. Disconnect the 3 wire harness from the speed sensor
and remove the sensor from the transmission.
Speed Sensor
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
2. Connect the wires from the Static Timing Light
Harness to the sensor 3 pin connector using the Hall
Sensor Probe Harness (PN 2460761).
3. Pass a screwdriver back and forth in front of the
sensor tip.
4. Be sure connections are good and 9V battery is in
good condition. If the light flashes, the sensor is good.
ELECTRICAL
10
10.15