Instrument Cluster Diagnostic Mode - Polaris A12MH46AX Service Manual

Instrument Cluster Diagnostic Mode

NOTE: This gauge features auto shut-off protection
if the voltage on the DC bus is excessive. This is
usually the result of an open battery condition, and
the gauge is designed to survive such an event.
NOTE: If the gauge will not indicate what gear it is in
and will not allow AWD operation, AWD can still be
enabled by holding in the mode/override button.
NOTE: As long as you are in the diagnostic mode,
the wrench icon will remain lit.
NOTE: Any movement of the tires will trigger the
speedometer out of the diagnostic mode and into
standard display mode.
NOTE: To leave the diagnostic mode, turn the key
switch off and on.
1. Turn the key switch off and wait 10 seconds.
2. Set the park brake and shift the transmission to
neutral.
3. Hold the mode/reverse override button as you turn the
key switch on.
4. Release the switch as soon as the display is activated.
Use the mode/reverse override button to toggle through
the diagnostic screens.
NOTE: The initial screen display refers to the
software version installed on your ATV.
information is only displayed briefly.
Screen 1: The first screen indicates battery voltage. Refer
to Ill. 2.
Ill. 2
This
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
Screen 2: Tachometer (Ill. 3) indicates engine rpm.
Ill.3
Screen 3: AWD diagnostic screen. This screen indicates
whether or not current is flowing through the AWD coil on
models with switchable AWD.
ELECTRICAL
AWD Off
AWD On
10
10.7