Lubrication Components - Polaris A12MH46AX Service Manual

MAINTENANCE

Lubrication Components

1
3A
# I
TEM
1. Engine Oil
2. Transmission
Front
3 Gearcase Demand Drive PLUS
Polaris DOT 4 Brake
4. Brake Fluid
5. Front A-Arm
6. Rear A-Arm
Polaris U-Joint Grease
7. Propshafts
* Perform more often under severe use, such as operation in water and under severe loads.
(A) Semi-annually or 50 hours of operation. Refer to Maintenance Schedule for additional information. Service more
often under severe conditions (i.e. operating in water or hauling heavy loads).
(B) Annually or 100 hours of operation Refer to Maintenance Schedule for additional information. Service more often
under severe conditions (i.e. operating in water or hauling heavy loads). ADC gearcase fluid should be changed every
25hrs of operation in extreme use conditions (i.e. continuous operation on hilly or mountainous terrain or if ADC 'on' is
primary mode of AWD operation).
(C) Grease conforming to NLGI No. 2, such as Polaris Premium All Season Grease, Conoco Superlube M, or
Mobilgrease Special.
2.8
3B
L
UBE
Check oil tank dipstick and
Polaris PS-4 Plus
Polaris AGL Plus
Synthetic Gearcase Add lube to bottom fill hole.
Lube
Fill master cylinder reservoir
Fluid
Polaris All Season
Grease
Polaris All Season
Grease
(C)
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
2
M
ETHOD
add to proper level.
Drain as directed.
Add specified quantity.
to indicated level
Locate fitting and grease.
Locate fitting and grease
Locate fitting and grease.
4
7
F
REQUENCY
Change after 1st month, 6 months, or 100
hours thereafter; Change more often (25-
50 hours) in extremely dirty conditions, or
short trip cold weather operation.
Change annually (B)
Gearcase - Change annually (B)
As required, change fluid every 2 years
Semi-annually (A)
Semi-annually (A)
Semi-annually (A)
5
6
*