Setting Send Restriction - Kyocera Ecosys M6526cdn Operation Manual

Menu:
1 Detail/Edit
2 Delete
*********************
3
Add FAX ID
Delete.
Are you sure?
z
[ Yes

Setting Send Restriction

You can restrict the other parties to which you send originals only to the ones registered in Permit FAX No. and
Permit ID No. as well as the ones registered in the Address Book. To change the sending restriction, follow the
steps below.
TX/RX Restrict.: a b
1
TX Restriction
*********************
2
RX Restriction
3
Permit No. List
a b
0004
] [ No
[ Exit
Deleting Permit ID No.
1 Press the  or  key to select [Delete].
2 Press the OK key.
3 Press [Yes] (the Left Select key). This deletes
the Permit ID number.
]
5
To change and delete other Permit ID numbers,
repeat step 2 to 4.
1
Refer to Basic Operation Procedure on page 6-7.
2
Press the  or  key to select [TX Restriction].
]
3
Press the OK key.
4
Press the  or  key to select sending restriction.
To not use the sending restriction, select [Off]. To
restrict the other parties only to the ones registered
in Permit FAX No. and Permit ID No. as well as the
ones registered in the Address Book, select
[Permit+Addr Book].
5
Press the OK key.
6-38
Setup and Registration