Rx Start Speed - Kyocera Ecosys M6526cdn Operation Manual

RX Start Speed

When communication conditions are bad, the fax may not be received correctly. In that case, set a lower RX
Start Speed.
Normally this should be used with the default setting.
1
Refer to Basic Operation Procedure on page 6-7.
2
Press the  or  key to select [RX Start Speed].
3
Press the OK key.
4
Press the  or  key to select [9600bps],
[14400bps] or [33600bps].
5
Press the OK key.
6-29
Setup and Registration
6