Clear Phrase - Yamaha MOTIF XF Reference Manual

display and the Sample Voice data will not be copied. If
this occurs, use Sample Job 02: Delete to delete any
unused samples, then try again.
NOTICE
Undo/Redo cannot be used to undo/redo a Sample Voice copy
operation.

08: Clear Phrase

This Job deletes all data from the selected Phrase.
Phrase
Determines the Phrase number (001 – 256) to be cleared.
Clear Sample Voice
When the checkbox is checked, the Sample Voice used in
the Phrase specified above will also be cleared.
NOTICE
Undo/Redo (page 154) cannot be used to undo/redo a Delete
sample operation.
[F5] Track Jobs
01: Copy Track
This Job copies all data of the selected type from a
specified source track to a specified destination track. This
is useful if you are creating a Pattern and wish to use the
track data from another Pattern.
Source Track
Destination Track
Determines the Pattern number (01 – 64), Section (A – P)
and Track (01 – 16) of source and destination respectively.
NOTICE
Any previous data in the copy destination will be overwritten.
Data Type to be copied
Determines the type(s) of data to be copied.
Settings: Sequencer Event (all events in the track), Play Effect, Mix
Part Parameter (all Mixing Part parameters), Sample Voice
n When there is no memory available in the destination Pattern
for Sample Voice data, an alert message will appear on the
display and the Sample Voice data will not be copied even
though the check box of the Sample Voice is marked. If this
occurs, use Sample Job 02: Delete to delete any unused
samples, then try again.
NOTICE
Undo/Redo (page 154) cannot be used to undo/redo a Delete
sample operation.
02: Exchange Track
This is the same as in the Song Job mode. See page 163.
03: Mix Track
This is the same as in the Song Job mode. See page 163.
04: Clear Track
This Job deletes all data of the selected type from the
selected track.
Tracks
Determines the track to be cleared by specifying the
Section (A – P, all) and Track (01 – 16, all).
Data type to be cleared
Determines the type(s) of data to be cleared. Select the
desired type by checkmarking the appropriate box.
Settings: Sequencer Event (all events in the track), Play Effect, Mix
Part Parameter (all Mixing Part parameters), Sample Voice
NOTICE
Undo/Redo cannot be used to undo/redo a Clear operation for
tracks that contain sample data.
n The Waveform on SDRAM cannot be deleted via this Job even
if the Sample Voice box is checked. If you want to actually
delete the Waveform assigned to the Sample Voice used in the
specified Song, use the Delete Job (page 131) in the
Sampling Job mode.
Pattern Jobs
MOTIF XF Reference Manual
185