Yamaha MOTIF XF Reference Manual page 24

Effect Block
Sets the Part EQ parameters applied to each
part in the EQ display (page 103) of
Performance Part Edit.
Determines the Send Level/Return Level to/
from the Reverb/Chorus and the signal level
sent from the Chorus to the Reverb.
This block also selects the Effect Types of Reverb and
Chorus respectively and sets the related parameters.
These can be set in the Connect display (page 107)
and the Reverb display/Chorus display (page 108) of
Performance Common Edit.
Mixing mode
Mixing
Part
Part EQ
Insertion A/B
Part 1 – 16
AD Part
Sets the Part EQ parameters applied to each
part in the EQ display (page 195) of Mixing Part
Edit.
Selects the eight Parts to which the Insertion
Effect is applied from Parts 1 – 16 and the AD
Part.
This can be set in the Insertion Effect Switch display
(page 193) of the Mixing Edit.
Determines the Send Level/Return Level to/
from the Reverb/Chorus and the signal level
sent from the Chorus to the Reverb.
This block also selects the Effect Types of Reverb and
Chorus respectively and sets the related parameters.
These can be set in the Connect display (page 193)
and the Reverb display/Chorus display (page 193) of
Mixing Common Edit.
Selects the Master Effect type and sets the
Effect parameters in the Master Effect display
(page 193) of Mixing Common Edit.
Sets the Master EQ parameters in the Master
EQ display (page 193) of Mixing Common Edit.
n The Effect settings of
page 23 are available for up to eight parts for which the
Insertion Effect is turned on.
24
MOTIF XF Reference Manual
Voice
Send
Level
Chorus
– in the Voice mode illustrated on
Selects the Master Effect type and sets the
Effect parameters in the Master Effect display
(page 104) of Performance Common Edit.
Sets the Master EQ parameters in the Master
EQ display (page 105) of Performance
Common Edit.
n The Effect settings of
page 23 are available also in the Performance mode.
Master Effect
Return
Level
Reverb
Chorus To
Reverb
Effect Category and Type
This section explains the Effect categories and their types.
The Effect Type list described below for each category
contains the columns: Rev (Reverb), Cho (Chorus), Ins
(Insertion) and Mas (Master Effect). The checkmarks
indicated in these columns means the Effect Type is
available for each block. These Effect types (with the
checkmarks indicated in each list) can be selected from
the panel controls.
Reverb
Also called "reverberation," this refers to the sound energy
remaining in a room or closed space after the original
sound stops. Similar to yet different from echo, reverb is the
indirect, diffuse sound of reflections from the walls and
ceiling that accompany the direct sound. The
characteristics of this indirect sound depends on the size
of the room or space and the materials and furnishings in
the room.
Effect Type Rev

REV-X HALL

R3 HALL
– in the Voice mode illustrated on
Master EQ
Cho Ins Description
– – Reverb emulating the
acoustics of a concert hall
using the REV-X technology.
– – Reverb emulating the
acoustics of a concert hall
using the algorithm derived
from the Yamaha ProR3.