Yamaha MOTIF XF Reference Manual page 173

5
Press the [F] (Play) button to start recording.
To change Sections in realtime and record them, press
the [TRACK] button (the lamp lights), then use the [A] –
[H] buttons, [USER 1] – [USER DR] buttons and
[ETHNIC] button. To make Track Mute on/off settings,
press the [MUTE] button (the lamp lights), then press
the appropriate Number [1] – [16] buttons. The tempo
can be changed by pressing the [DEC/NO]/[INC/YES]
button, turning the data dial, or using the [SF1] – [SF5]
and [F1] – [F5] buttons as numeric keys after pressing
the [SF6] NUM button.
6
Press the [J] (Stop) button to stop recording.
7
Press the [STORE] button to store the recorded
Chain data on the internal User Memory.
n For more information on storing a Pattern, see page 177.
Editing a Pattern Chain—[EDIT] Chain Edit
This mode gives you comprehensive, detailed controls for
editing the events of the recorded Pattern Chain. Events
such as Section change, Track mute on/off, Tempo change
and Meter can be recorded as Pattern Chain data. Press
the [EDIT] button from the Chain Play display to call up the
Chain Edit display. Press the [EXIT] button to go back to
the Chain Play display.
MEAS (Measure)
BEAT
CLOCK
Indicates the location of the corresponding event.
Changing any of these values changes the location of the
event accordingly.
Settings:
MEAS (Measure): 001 – 256
BEAT: 01 – 16 (The available range may change depending on the
Meter.)
CLOCK:
000 – 479 (The available range may change depending on
the Meter.)
Event Type
Setting Values
The following events are available in the Pattern Chain mode.
Section Change timing of Sections A – P and
End event of the data.
TrackMute The "m" indicates the corresponding
track is muted.
Tempo 005.0 – 300.0
TimeSig (Time Signature) 1/16 – 16/16, 1/8 – 16/8, 1/4 – 8/4
[SF1] View Filter
This display lets you select the event types that appear on
the Chain Edit display. This is particularly useful when
many types of events are mixed together, but you only want
to display the events you intend to edit.
Time Signature
Section
Track Mute
Tempo Change
Only events with checked boxes will appear in the Chain
Edit display. If the box is set to off, the corresponding event
will disappear in the Chain Edit display.
[SF2] Copy
The function of this display lets you copy events from a
specified range to another range.
Source Range
Destination Location (Top Measure)
Determines the source range and the top measure of the
destination.
Settings: 001 – 256
Number of Times
Determines the number of times the data is copied.
Settings: 01 – 99
Pattern Playback
MOTIF XF Reference Manual
173