Yamaha MOTIF XF Reference Manual page 215

Program
Indicates the number and name of the program (Voice,
Performance, Song, or Pattern) that is called up when the
Master is selected. The program differs depending on the
memorized mode.
When the Voice mode is
memorized:
When the Performance mode is
memorized:
When the Song mode is
memorized:
When the Pattern mode is
memorized:
Zone Switch
Determines whether or not the keyboard will be divided into
(up to) eight independent areas (called "Zones"). For
details about Zones, see page 212.
Transmit Channel
Indicates the MIDI transmit channel of each Zone (when
the Zone Switch is set to on).
Zone Edit parameters
[MASTER]  [EDIT]  [1] – [8]
These parameters are for editing the individual Zones that
make up a Master. To call up the Zone Edit display, press
the [EDIT] button in the Master Play mode, then press any
of the Number buttons [1] – [8]. Press the [EXIT] button to
return to the Master Play display.
MIDI Transmit Channel/Switch Settings
—[F1] Transmit
From this display you can set how each Zone transmits
MIDI messages when you play the keyboard.
Transmit Channel
Determines the MIDI Transmit Channel for each Zone.
Settings: 1 – 16
Int Switch (Internal Switch)
Determines whether or not MIDI data for each Zone is
transmitted to the internal tone generator.
n When the Local Control parameter is set to "off" on the MIDI
display (page 228) in the Utility mode, MIDI data for each
Zone will not be transmitted to the internal tone generator,
even if the Int Switch parameter is set to "on."
Voice Bank, Number, Category,
Name
Performance Bank, Number,
Category, Name
Song number, Song name
Pattern number, Pattern name
Using as a Master Keyboard (Master mode)
Ext Switch (External Switch)
Determines whether or not MIDI data for each Zone is
transmitted to an external MIDI device.
Note Range Setting for each Zone—[F2]
Note
From this display you can set the pitch- and keyboard-
related parameters for each Zone—allowing you to set up
Zone splits and determine the pitch range for each Zone.
Octave
Determines the amount in octaves by which the range of
the Zone is shifted up or down. You can adjust the offset up
or down over a maximum range of three octaves.
Settings: -3 – +0 (Default) – +3
Transpose
Determines the amount in semitones by which the range of
the Zone is shifted up or down.
Settings: -11 – +0 (Default) – +11
Note Limit Low
Note Limit High
Determines the lowest and highest notes of the range for
each Zone.
Settings: C -2 – G8
n You can also set the note directly from the Keyboard, by
holding down the [SF6] button and pressing the desired key.
MIDI Transmit Switch Settings—[F3] Tx
Switch (Transmit Switch)
MIDI Transmit Switch for the Voice related
messages—[SF1] Program
From this display, you can determine whether or not MIDI
messages controlling Voice selection for each Zone are
transmitted to the internal/external tone generator.
MOTIF XF Reference Manual
215