Yamaha MOTIF XF Reference Manual page 108

Editing a Performance
Chorus Return
Determines the Return level of the Chorus Effect.
Settings: 0 – 127
Chorus Pan
Determines the pan position of the Chorus effect sound.
Settings: L63 (far left) – C (center) – R63 (far right)
Reverb Return
Determines the Return level of the Reverb Effect.
Settings: 0 – 127
Reverb Pan
Determines the pan position of the Reverb effect sound.
Settings: L63 (far left) – C (center) – R63 (far right)
Setting the parts available for the
Insertion Effect—[SF2] InsSwitch
In this display, you can select which Parts (from
Performance Parts 1 – 4 and the A/D Input Part) will be
assigned to the eight Insertion Effects.
Part 1 – 4, A/D
Determines the Parts available for the Insertion Effect.
When this switch is set to on, the Insertion Effect of the
Voice assigned to the Part is enabled. Make sure that this
parameter is set to on for any Parts/Voices to which you
need to apply Insertion Effects. The MOTIF XF features
eight Insertion effect systems, letting you set this
parameter to on for all five Parts.
n For the A/D Input Part, the Insertion Effect type/parameter can
be set from the Insertion A/B display in the Audio In parameter
of the Performance Common Edit mode. For Parts 1 – 4, the
Insertion Effect type/parameter settings cannot be set in the
Performance Edit mode because their settings are included in
the Voice assigned to each Part. If you wish to edit the
Insertion Effect settings for each Part, enter the Voice Edit
mode, then edit the Effect settings for the appropriate Voice.
108
MOTIF XF Reference Manual
Reverb and Chorus Settings—[SF3]
Reverb, [SF4] Chorus
n Depending on the selected parameter, the LIST icon is shown
at the tab menu corresponding to the [SF6] button. In this
condition, you can call up the list by pressing the [SF6] LIST
button, then select the desired item from the list. For details
see page 37.
Type
From the Type column, you can select one of the Effect
Types listed in the selected Category.
Settings: Details about the Effect types are described on page 24.
Preset
You can set various parameters in order to change how the
sound is affected by the selected Effect type. This
parameter lets you call up the pre-programmed settings of
these effect parameters.
Effect Parameters
The number of parameters and values available differs
depending on the currently selected effect type. Refer to
page 27 for details about the Effect parameters. Refer to
the separate Data List for information on the parameters for
each Effect type.