Yamaha MOTIF XF Reference Manual page 244

File Management (File mode)
Voice List
6
Move the cursor to the desired Voice or Voice
Bank.
The Load menu corresponding to the [SF2] button
appears.
7
Press the [SF2] button (a prompt for
confirmation appears).
Press the [DEC/NO] button to cancel the Load
operation.
8
Press the [INC/YES] button to execute the Load
operation.
NOTICE
The Load operation overwrites any data previously existing in
the destination internal memory. Important data should always
be saved to a USB storage device connected to the USB TO
DEVICE terminal or to a computer connected to the same
network as the MOTIF XF (page 241).
Loading a specific Waveform from an
"all" or "all waveform" file
1
Select a device and directory as the source by
following the instructions in "Basic Procedure
in the File mode" on page 238.
2
Set the Type ( ) to "waveform."
Only available files according to the Type are listed in
the Directory/File list box on the display.
244
MOTIF XF Reference Manual
n In this step, the Load menu corresponding to the [SF2]
button is not shown in the display. The Load menu appears
when selecting a Waveform to be loaded in step 6.
3
Select the file to be loaded.
You can select any of the files listed in the Directory/File
list box on the display.
4
Press the [ENTER] button so that the three
memory types (USR, FL1 and FL2) are shown
on the display, then move the cursor to the
desired memory type.
5
Press the [ENTER] button so that the
Waveforms in the selected file are listed on the
display.
Waveforms
6
Move the cursor to the desired Waveform.
The Load menu corresponding to the [SF2] button
appears.
7
Specify the destination memory location in the
User memory.
At , select a Part to which the Waveform is to be
assigned, when entering the File mode from the
Performance/Song/Pattern mode.
At , select an Element (for a Normal Voice) to which
the Waveform (loaded to an empty number) is to be
assigned.
n Please note that Waveforms cannot be loaded to a Drum
Voice.
n When entering the File mode from the Performance/Song/
Pattern mode, determine the Part to which the Voice
including the loaded Waveform is to be assigned.