Create Continuous - Yamaha MOTIF XF Reference Manual

Song Job
05: Create Continuous Data
This Job creates continuous pitch bend or control change
data over the specified range.
Track and range
Determines the Song track (01 – 16, tempo, all) and range
(Measure : Beat : Clock) over which the Job is applied.
Event Type
Determines the event type to be created.
Settings:
When the Track is set to one of 01 – 16 and all:
Pitch Bend, Control Change*, Ch. After Touch (Channel Aftertouch),
System Exclusive
*You can also specify the Control Number (0 – 119)
When the Track is set to "tempo":
Tempo Change
n You can produce accelerando/ritardando by applying this Job
to the Tempo track. This is useful, for example, in slowing
down the tempo in the Ending section of a Song.
n When "System Exclusive" is selected, the continuous data of
the Master Volume is created.
n You can call up the list and select the desired one by pressing
the [SF6] LIST button. For details, see page 37.
Data Range
Determines the lower and upper limits for the data range to
be created.
Settings: 0 – 127 (-8192 – +8191 when the Event Type is set to "Pitch
Bend" and 5.0 – 300.0 when the Event Type is set to "Tempo
Change.")
Clock
Determines the number of clocks to be inserted between
each created event.
Settings: 001 – 999
Curve
Determines the curve of the continuous data. Refer to the
graph below for approximate curve shapes.
Settings: -16 – +16
Curve = +16
Start point
160
MOTIF XF Reference Manual
Curve = 0 (linear) Curve = -16
End point
The distance specified by Clock
Number of Times
Determines the number of times the data creation is to be
repeated. For example, if data is created in the range
M001:1:000 – M003:1:000 and this parameter is set to 03,
the same data will be created at M003:1:000 – M005:1:000
and M005:1:000 – M007:1:000. This Job lets you insert
continuous volume (expression) or filter cutoff variations to
create tremolo or wah effects.
Settings: x 01 – x 99
06: Thin Out
This Job thins out or selectively removes the specified type
of continuous data in the specified range—allowing you to
free up memory space for other data or further recording.
Track and range
Determines the Song track (01 – 16, tempo, all) and range
(Measure : Beat : Clock) over which the Job is applied.
Event Type
Determines the event type to be thinned. The Thin Out Job
will not work on continuous data that has a clock interval of
greater than 60 clocks per event.
Settings:
When the Track is set to one of 01 – 16 and all:
Pitch Bend, CC & Ch. Mode (Control Change and Channel Mode
Message)*, Ch. After Touch (Channel Aftertouch), Poly After Touch
(Polyphonic Aftertouch)
*You can also specify the Control Number (0 – 127, all)
When the Track is set to "tempo":
Tempo Change