7: Continuous Slider - Yamaha VL-7 Owner's Manual

Feature Reference

7: Continuous Slider

CS1
CS2
Assigns the available common or element edit parameters to the – or
continuous slider. The continuous sliders can then be used in the PLAY mode to edit the
assigned parameters in real time while playing (the same applies to the EDIT and UTIL-
ITY modes). The parameter consists of two parts which can be selected independently by
moving the cursor horizontally. The first (leftmost) part determines what type of param-
eter will be controlled.
off
COM
EL
The second (rightmost) is the actual parameter which will be controlled. The param-
eters available for editing via the continuous sliders are individually preset for each voice.
• Since the continuous sliders actually edit the parameters to which they are
assigned, the "new" voice created by using the sliders can be stored to one of
the VL7's voice memory locations and used just as if it had been edited in the
EDIT mode (
• The continuous slider view function, available in the PLAY mode (
13), shows you which parameters are assigned to which controller as well as
the current positions of the controllers and their corresponding values.
Edit Mode
Continuous slider not assigned. Choose this setting if you don't want
the continuous slider to affect any edit parameters.
Selects the common edit parameters.
Selects the element edit parameters.
the STORE operation is described on page 27).
Page