Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
Set the date, time and time difference from GMT of the region where the machine is used.
NOTE:
Be sure to set the time difference before setting the date and time.
Sys. Menu/Count.:a b
3
System
4
Administrator
5
*********************
Common Settings
Common Settings: a b
1
Language
*********************
2
Default Screen
3
Sound
Login User Name: L b
********************
Login Password:
OPERATION GUIDE
1
Turn on the main power switch.
2
Press the System Menu/Counter key on the main
unit operation panel.
3
In the Sys. Menu/Count. menu, press the or
key to select [Common Settings].
[ Exit
]
4
Press the OK key. The Common Settings menu
appears.
[ Exit
]
5
Press the or key to select [Date Setting], and
press the OK key.
6
A login screen will appear. Then, enter the login
user name and password with device administrator
privileges to log in, and press [Login] (the Right
Select key).
The default setting of login user name and
password is 2400.
[ Login
]
Preparation before Use
2-7
2