Kyocera FS-1024MFP Operation Manual page 243

OPERATION GUIDE
3
Remove the drum unit from the machine by holding
the green levers with both hands.
NOTE:
The drum unit is sensitive to light. Never
expose the drum unit to light for more than five
minutes.
4
Place the drum unit flat on a clean, level surface.
IMPORTANT: Do not place the drum unit on end.
5
Use a clean, lint free cloth to clean dust and dirt
away from the metal registration roller.
IMPORTANT: Take care not to touch the transfer roller
(black) during cleaning.
6
On the drum unit, slide the main charger cleaner
(green) back and forth 2 or 3 times to clean the
charger wire, then return it to its original position
(CLEANER HOME POSITION ).
IMPORTANT: Remove the fixing tape on the main
charger cleaner before cleaning for the first time.
After cleaning, make sure you restore the main charger
cleaner to its home position.
Maintenance
9
9-3