Kyocera FS-1024MFP Operation Manual page 252

Troubleshooting
Symptom
Cannot print.
Documents are
printed improperly.
USB memory not
recognized.
Vertical streaks
appear on prints.
10-4
Checkpoints
Is the machine plugged in?
Is the machine powered on?
Is the printer cable
connected?
Was the machine powered
on before the printer cable
was connected?
Is the print job paused?
Are the application software
settings at the PC set
properly?
Check that the USB memory
is securely plugged into the
machine.
Is the USB host blocked?
The inside of the machine
may be dirty.
Corrective Actions
Plug the power cord into an AC
outlet.
Turn on the main power switch.
Connect the correct printer cable
securely.
Power on the machine after
connecting the printer cable.
Press [Resume] (the Left Select
key) to resume printing.
Check that the printing system
driver and application software
settings are set properly.
—
Select Unblock in the USB host
settings.
Check the toner container and if
necessary replace.
Clean the charger wire.
Check the main charger cleaner of
the drum unit is in its original
position.
Reference
Page
—
3-2
2-5
2-5
3-2
7-13
—
—
8-90
9-5
—
—
OPERATION GUIDE