Kyocera FS-1024MFP Operation Manual page 47

The software install wizard starts up.
From this point, the procedure differs depending on your version of Windows.
Proceed to the correct procedure for your connection type.
• Express Mode
• Custom Mode
Express Mode
In Express Mode, the installer automatically detects the printer when it is turned on. Use Express Mode for
standard connection methods.
1
In the installation method selection window, select Express Mode. The print system detection window
appears and the installer detects the connected printer. If the installer does not detect a print system, check
that the print system is connected via USB and that it is turned on. Then click Refresh to search print system
again.
NOTE:
While the information shown in Windows Vista and Windows 7/Windows XP installation dialog boxes
differs slightly, the installation procedure is the same.
2
Select the printer displayed on the discover printing system window and click Next.
OPERATION GUIDE
Preparation before Use
2-11
2