Kyocera FS-1024MFP Operation Manual page 271

Characters associated with different keys can be entered consecutively. To enter a character associated with
the same key after another, use cursor keys to move the cursor to the next entry position before entering it.
If you use cursor keys to move the cursor to an entry position apart from the end of the line and enter a character
there, spaces are automatically entered in between.
Entering Symbols
Symbols:
Entry When [Select Character] Is Selected in Login Operation Settings
In the login screen the character entry method may vary depending on the settings.
Login User Name: a b
Kyocer*
*abcdefghijklmnopqrst
uvwxyzABCDEFGHIJKLMNO
OPERATION GUIDE
Press [Text] (the Right Select key) or # on the
a b
numeric keys to display the Symbols screen. Use
cursor keys to select the symbol you want to enter
and then press the OK key.
[ Text ]
If a character palette appears on the screen, use
cursor keys to select the desired character from the
displayed characters, and then press the OK key to
enter it.
[ Next ]
NOTE:
numeric keys.
Numerals can be entered directly by pressing
Appendix-5