Utility mode
12.6.5
Punch Horizontal Position Adjustment
The horizontal position of punched holes when printing with a Punch setting can be adjusted for each paper
size.
Note
[Punch Horizontal Position Adjustment] appears only if optional punch kit is installed on the finisher.
For details on the Punch settings, refer to "Punching holes in copies (Punch settings)" on page 3-74.
0
Before making any adjustments, use a Punch setting to print a sample copy. Perform the adjustment
while checking the sample that was created.
1
Display the Administrator Settings screen.
–
For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 12-42.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [5 Punch Horizontal Position Adjustment].
The Punch Horizontal Position Adjustment screen appears.
bizhub 751/601 (Version 2)
12
12-53