Defective Fax Receive (2); Defective Fax Receive (3); Defective Fax Receive (4) - Ricoh B173 Service Documentation

4.7.6 DEFECTIVE FAX RECEIVE (2)

Description
The received data are lengthened or cut in the printing.
Check and Cause
Check if there is NOISE when pressing
on-hook dial.
Ask the forwarding side to resend the
FAX from another machine. Check the
image quality received from the other
machine.

4.7.7 DEFECTIVE FAX RECEIVE (3)

Description
The phone is ringing continuously, but it cannot receive.
Check and Cause
Check if the RECEIVE mode is TEL
MODE or FAX MODE.

4.7.8 DEFECTIVE FAX RECEIVE (4)

Description
The received data is reduced by more than 50% in the printing.
Check and Cause
Check the FAX status of the forwarding
side.
B173
FAX & PHONE PROBLEMS
Solution
If it makes NOISE, rearrange the
telephone line. () 4.7.5)
Check if the FAX status of the
forwarding side is also normal.
Solution
Even when the RECEIVE mode is
changed to FAX MODE, it cannot
receive, then replace the LIU and the
Main Board in sequence.
Solution
After checking the data of the
forwarding side, correct the FAX on
the forwarding side.
4-34 SM